10 ft. Casita Showcase Kit

Compare

Fill a 10’ x 10’ outdoor space with a click of a button. Designed for your ease, here is your outdoor turnkey solution.

 

10ft. Casita Showcase Kit Includes:

  • (1) 10ft. UV Casita Canopy Tent Graphic Package
  • (1) Casita Backwall Graphic with Rail
  • (2) 13ft. Falcon Flag Single-Sided Graphic Package

 

10ft. UV Casita Canopy Tent Graphic Package Includes:

  • (1) Custom UV Fabric Canopy Tent Graphic Print
  • (1) 10ft. Casita Canopy Frame
  • (1) Carry Bag
  • (4) Bungees
  • (4) Stakes

 

Casita Backwall Graphic and Rail Includes:

  • (1) Custom UV Fabric Backwall Graphic Print
  • (1) Rail

 

(2) 13ft. Falcon Flag Single-Sided Graphic Package Includes:

  • (2) Custom Single-Sided Fabric Graphic Prints
  • (2) Poles
  • (2) Spike Bases
  • (2) Nylon Carry Bags

 

More information

The bottom edge of the back valence of the Casita Canopy Tent comes with sewn-on Velcro (hook-side) that connects to the Velcro (loop-side) which comes pre-installed on the top edge of the Backwall. Both fabric graphics are full color and are printed using UV inks and UV curing process.

 

With five adjustable heights, the Casita Canopy frame is aluminum and collapsible. Simply collapse the frame and store it in the nylon travel bag. Nylon travel bag is black and has two short handle straps.

 

The Rail is also aluminum and comes as three pieces: two long, one short. The short piece has push button snaps and is the middle between the two long pieces. Also included are two black clamps with twist knobs. Once assembled, slide rail through the bottom pole pocket of the fabric backwall and connect to the hex leg using the black clamps. Hug each clamp around hex leg, position end of rail into clamp, line up holes, then twist in knob until tight and in place.

 

This 13ft. Falcon Flag is printed on polyester mesh by the process of dye sublimation. Our inks heavily saturate the material to create a “bleed-through” effect for our single-sided displays. Black flag trim is sewn on the spine of the graphic, leaving a pocket for the pole insertion. The edges are professionally hemmed. A set of grommets are installed on the bottom of the trim in which the short bungee cord (included) can loop through and snugly attach the graphic to the base.

Fill a 10’ x 10’ trade show booth with a click of a button. Designed for your ease, here is your FABRIC turnkey solution.

10ft. RPL Showcase Kit Includes:

10ft. RPL Curved Fabric Graphic Package

Ready Pop Counter with Fabric Graphic

Single EZ Frost Literature Stand

10ft. RPL Curved Fabric Graphic Package Includes:

(1) Custom Fabric Graphic Print with End Caps

(1) 10ft. RPL Curved Frame (118”W x 89”H x 12”D)

(1) Nylon Travel Bag

Ready Pop Counter with Fabric Graphic Includes:

(1) Custom Fabric Graphic Print with End Caps

(1) Ready Pop Counter Frame (40”W x 40”H x 12.5”D)

(1) Black Acrylic Counter (35”W x 15.5”D)

(1) Canvas Bag (8”W x 35”H)

Single EZ Frost Literature Stand Includes:

(1) Literature Stand (9”W x 50.5” or 59”H; shelf display area: 9″W x 12.25″H)

(1) Hard Carry Case with Handle (19″W x 13″H x 7.5″D)

More information

The fabric graphic for the 10ft. RPL comes with sewn-on Velcro (loop-side) that connects to the Velcro (hook-side) which comes pre-installed on the RPL frame. The 10ft. RPL frame is aluminum and collapsible. The full color fabric graphic is printed using the dye sublimation process. Simply collapse the frame and store it in the nylon travel bag. Nylon travel bag is black and has two short handle straps.

The Ready Pop Counter is aluminum and, after the graphic is attached, is open in the back. Hook and loop comes pre-installed just like the 10ft. RPL. Simply collapse the frame and store it in the canvas bag. Canvas bag is soft, black and has a shoulder strap. Fabric graphic is also a full color dye sublimated print.

The Single EZ Frost Literature Stand comes with two adjustable height options. Pull up to increase height and latch at the bottom to secure.

*Monthly specials and discounts do not apply to our showcase kits*

$1,749.00

SKU: CAS-SHOWCASEKIT Category:

Description

Fill a 10’ x 10’ outdoor space with a click of a button. Designed for your ease, here is your outdoor turnkey solution.

 

10ft. Casita Showcase Kit Includes:

  • (1) 10ft. UV Casita Canopy Tent Graphic Package
  • (1) Casita Backwall Graphic with Rail
  • (2) 13ft. Falcon Flag Single-Sided Graphic Package

 

10ft. UV Casita Canopy Tent Graphic Package Includes:

  • (1) Custom UV Fabric Canopy Tent Graphic Print
  • (1) 10ft. Casita Canopy Frame
  • (1) Carry Bag
  • (4) Bungees
  • (4) Stakes

 

Casita Backwall Graphic and Rail Includes:

  • (1) Custom UV Fabric Backwall Graphic Print
  • (1) Rail

 

(2) 13ft. Falcon Flag Single-Sided Graphic Package Includes:

  • (2) Custom Single-Sided Fabric Graphic Prints
  • (2) Poles
  • (2) Spike Bases
  • (2) Nylon Carry Bags

 

More information

The bottom edge of the back valence of the Casita Canopy Tent comes with sewn-on Velcro (hook-side) that connects to the Velcro (loop-side) which comes pre-installed on the top edge of the Backwall. Both fabric graphics are full color and are printed using UV inks and UV curing process.

 

With five adjustable heights, the Casita Canopy frame is aluminum and collapsible. Simply collapse the frame and store it in the nylon travel bag. Nylon travel bag is black and has two short handle straps.

 

The Rail is also aluminum and comes as three pieces: two long, one short. The short piece has push button snaps and is the middle between the two long pieces. Also included are two black clamps with twist knobs. Once assembled, slide rail through the bottom pole pocket of the fabric backwall and connect to the hex leg using the black clamps. Hug each clamp around hex leg, position end of rail into clamp, line up holes, then twist in knob until tight and in place.

 

This 13ft. Falcon Flag is printed on polyester mesh by the process of dye sublimation. Our inks heavily saturate the material to create a “bleed-through” effect for our single-sided displays. Black flag trim is sewn on the spine of the graphic, leaving a pocket for the pole insertion. The edges are professionally hemmed. A set of grommets are installed on the bottom of the trim in which the short bungee cord (included) can loop through and snugly attach the graphic to the base.

Additional information

Weight 78 lbs
Dimensions 40 × 28 × 18 in